-
-
SKU: C-CHEMCLE1.0KCRC-KEG
Cleaner Chemclean Powder 1kg alkaline for brewing equipment
Effective alkaline cleaner for brewing equipment, fermentation tanks, and barrels. Removes proteins, stains, carbon, and fatty acids. Suitable for hot and cold use on stainless steel, soft metals, plastics, and glass. | brewing cleaner, alkaline detergent, fermentation tank cleaner, equipment cleaning, PBW alternative
Installation Installation service: we install the device on site according to the manufacturer's instructions, connect to the line (mechanical connections) and perform initial setup and test run. Price depends on location, access and scope of work. (price by agreement / quote)No Yes28.90€
Price without VAT23.31€
To be ordered Delivery time: 21–35 business daysTo be ordered. This product is manufactured to order. The 14-day right of withdrawal does not apply (Law of Obligations Act § 56 (3) 1).0Europe/Tallinnout_of_stock_products0AvailabilityOut of Stock Pärnu 0 pcs To be ordered Out of Stock Supplier warehouse 0 pcs To be ordered Delivery 7-14 Shipping informationLoading…Warranty 24 monthsTo be ordered – right of return does not applyB2B invoice paymentSpare parts from e-shop -
-
Description
Cleaner Chemclean Powder 1kg alkaline for brewing equipment
Usage: Chemclean Powder is an effective alkaline cleaner suitable for both hot and cold use, highly utilized by brewers for deep-cleaning brewing equipment, fermentation tanks, cornelius barrels, and more.
Features: This detergent effectively eliminates proteins, stains, carbon, and fatty acids. Works well on stainless steel, soft metals, plastics, and glass. Same cleaning power as PBW, Craftclean, and similar products.
Instructions for use:
- Mixing ratio: Dissolve 50g Chemclean in 5 litres of water for manual cleaning (scrubbing). 50g per 20 litres of water for soaking. Dosage can be increased up to 5% depending on soiling conditions.
- Remove as much loose dirt as possible by rinsing equipment and containers before cleaning.
- Manual cleaning: Scrub all surfaces with the cleaner until all surfaces are clean.
- Circulation cleaning: Use 50g per 20 litres of water for fermentation vessels, barrels, tanks and other equipment. Circulate for 30 minutes at up to 60°C. Mixing ratio and circulation time may need to be adjusted depending on the amount of soiling.
- Soaking: Ensure all equipment to be cleaned is fully submerged. Soak for 4 hours at up to 60°C, or soak in cold water overnight.
- Rinse equipment thoroughly after cleaning. The solution can be reused during the cleaning process.
- Do not use on Teflon-coated surfaces.
⚠️ Safety Information: Contains sodium carbonate & sodium metasilicate pentahydrate. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection. Harmful if swallowed. Causes severe skin burns and eye damage. May irritate respiratory system. Do not breathe dust/fume/gas/mist/vapours/spray. Wash hands thoroughly after use. Do not eat, drink or smoke when using this product. If medical advice is needed, have product container or label at hand. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If swallowed: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. DO NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. If inhaled: Move person to fresh air and keep comfortable for breathing.
-
Frequently asked questions about C-CHEMCLE1.0KCRC-KEG
Which devices can I clean with Chemclean powder?
Chemclean is suitable for brewing equipment, fermentation vessels, Cornelius kegs, tanks, hoses and more. It works on stainless steel, soft metals, plastic and glass. Do not use it on Teflon-coated surfaces, as alkaline cleaning agents can damage the coating over time.
What is the correct dosage?
For manual scrubbing, dissolve 50g in 5 liters of water. For soaking or circulation cleaning, use 50g per 20 liters of water. The dose can be increased up to 5% depending on the level of dirt. Always rinse equipment thoroughly after cleaning.
Can the cleaning solution be reused?
Yes, Chemclean solution can be used repeatedly during the same cleaning process until it is visibly clean and effective. For heavily soiled equipment, prepare a fresh solution for best cleaning results.
Is Chemclean powder equivalent to PBW?
Yes, Chemclean powder has the same cleaning power as PBW, Craftclean and similar alkaline brewery cleaners. It effectively removes proteins, stains, carbon and fatty acids and is a reliable alternative for homebrewers and commercial breweries alike.
What safety measures should I follow?
Always wear protective gloves, safety glasses and protective clothing. The product contains sodium carbonate and sodium metasilicate pentahydrate, which can cause severe skin corrosion and eye damage. Avoid breathing dust. Keep out of the reach of children and rinse the equipment thoroughly after use.
-
Specifications
Length (mm) 600.00 Width (mm) 400.00 Height (mm) 400.00 Weight (kg) 1.00 Gross Weight (kg) 1.30 Unit pcs Temperature range 60°C – 60°C Certifications CE
PED
Throughput 5 L/h Weight (kg) 1
-
Do you want to preserve existing shopping cart?
Error