+372 5351 6054
[email protected]
Mon–Fri 9:00–16:00
  • Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer
    Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer
    Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer
    Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer
    Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer
    Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer

  • SKU: KL25539

    Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer

    Brand

    Professional beer pump for long draw keg systems. Drives beer from keg to tap using air compressor or CO2/Nitrogen. Prevents foaming. Complete with 9.5mm/12.7mm stepped barb. | beer pump, keg pump, Flojet G56, beverage pump, long draw

    Installation Installation service: we install the device on site according to the manufacturer's instructions, connect to the line (mechanical connections) and perform initial setup and test run. Price depends on location, access and scope of work. (price by agreement / quote)
    No Yes

    179.00€

    Price without VAT

    144.35€

    To be ordered Delivery time: 21–35 business days
    To be ordered. This product is manufactured to order. The 14-day right of withdrawal does not apply (Law of Obligations Act § 56 (3) 1).
    Availability
    Out of Stock Pärnu 0 pcs To be ordered
    Delivery 7-14
    Shipping information
    Loading…
    Warranty 24 months
    To be ordered – right of return does not apply
    B2B invoice payment
    Spare parts from e-shop

    • Description

      Pump Flojet G56 pneumatic 3/8PS-3/8PS-1/4B for beer

      Usage: The Flojet G56 is a professional beer pump used in the beverage industry for dispensing beer from keg to tap. This type of beer pump is considered essential for any long draw keg system, stadiums, or situations where beverages need to be delivered up to 10 stories high in buildings.

      Features: For most economical operation this pump should be driven using an oil-free air compressor (which you can purchase at any hardware store). If however you do not have an air compressor you can drive this pump with CO2/Nitrogen or other compressed gas cylinders. The increased pressure in the beverage line prevents dissolved gas in the beverage coming out in the beer causing foaming at the tap. These beer pumps are ideally used in conjunction with a FOB.

      Technical data: Comes complete with 9.5mm/12.7mm stepped barb. Barbed air/gas inlet.

    • Frequently asked questions about this product

      What type of draft systems require a beer pump like the Flojet G56?

      Long draw draft systems — where kegs are stored remotely from taps (typically over 7 meters) — require a beer pump to push beer through extended lines. This is common in stadiums, large restaurants, bars with basement keg storage, and commercial events. The pump compensates for friction loss in long beer lines.

      What drives the pump — air compressor or CO2?

      The Flojet G56 is pneumatic and can be driven by either compressed air or CO2/nitrogen gas. Many commercial installations use a dedicated air compressor, while smaller setups may use a CO2 or nitrogen regulator. The pump itself does not contact gas with the beer, preventing foaming.

      Why does this pump prevent foaming better than direct gas pressure?

      Direct gas pressure on long runs creates excessive turbulence and over-carbonation. The Flojet uses a diaphragm mechanism that pushes beer mechanically without introducing gas into the liquid stream, maintaining proper carbonation levels from keg to tap.

      What maintenance does this pump require?

      Regular cleaning with beer line cleaner is essential — follow the same schedule as your draft lines (every 2 weeks minimum). Inspect the diaphragm annually and replace if it shows wear. The included fittings should be checked for tight connections during routine maintenance.

      Does FERMETECH offer installation guidance for long draw systems?

      Yes, FERMETECH provides technical support for draft system design and installation. Long draw systems require careful planning of line diameter, glycol cooling for lines, pump placement, and regulator pressure settings. Contact FERMETECH for system design assistance.

    • Specifications

      Length (mm)600.00
      Width (mm)400.00
      Height (mm)400.00
      Weight (kg)0.60
      Gross Weight (kg)5.00
      Unitpcs
      Alcohol contact max %95
      High-temp food contact °C100
      Max temperature+70/+100
      Certifications

      PED

      Food compliance

      Acid-resistant

      Lead-free

      Cadmium-free

      Heavy metals compliant

      Compliant EU 1935/2004

      Compliant EU 10/2011

      Compliant LFGB

      Food contact certified

      Pump work element

      Air-operated diaphragm

      Intended use

      Beer

    • Files

      PDF
      FOOD · B2504TR90111S08 · KL25539
      971.18 KB · Siphon-Sucker-Pump.pdf
      PDF
      Siphon-Sucker-Pump-5.pdf
      971.18 KB · Siphon-Sucker-Pump-5.pdf
      PDF
      kegs-EU-food-contact-testing-report-351.pdf
      804.86 KB · kegs-EU-food-contact-testing-report-351.pdf
  • Any questions?
    Our specialists respond on weekdays within 1-4 hours

Do you want to preserve existing shopping cart?

×

Error

Please check import file format and chosen settings