-
-
SKU: KL04688
EAN: 5707546
Cone filter 200 micron stainless steel
Professional hop spider for beer brewing. Prevents hops from entering pump, chiller or fermenter. AISI 304 stainless steel, 300g capacity, 0.2mm mesh (99% efficiency). | hop spider, brewing, stainless steel, 300g, AISI 304
Installation Installation service: we install the device on site according to the manufacturer's instructions, connect to the line (mechanical connections) and perform initial setup and test run. Price depends on location, access and scope of work. (price by agreement / quote)No Yes19.90€
Price without VAT16.05€
0Europe/Tallinnout_of_stock_products0AvailabilityIn Stock Pärnu 7 pcs In Stock Out of Stock Supplier warehouse 0 pcs Out of Stock Shipping informationLoading…Warranty 24 monthsB2B invoice paymentSpare parts from e-shop -
-
Description
Cone filter 200 micron stainless steel
Usage: Professional mesh filter for sediment filtration
Features: With hanging handle. Basket 35cm high, top diameter 15cm, bottom 10cm. AISI 304 stainless steel, mesh size 0.2mm (40 mesh)
Technical data: Holds for example 300g pellet hops. Material: AISI 304 stainless steel. Mesh size: 0.2mm (99% efficiency). Height: 35cm. Top diameter: 15cm. Bottom diameter: 10cm.
-
Frequently asked questions about this product
What does the 200 micron / 40 mesh rating mean in practice?
The mesh openings are 0.2 mm, which corresponds to a 40-mesh screen and roughly 99% filtration efficiency for sediment. It holds back coarse particles and trub while letting clear liquid through, so it is aimed at sediment separation rather than fine polishing.
What is this cone filter typically used for?
It is a professional mesh filter for sediment filtration, for example removing trub or catching pellet hops during brewing; the basket can hold on the order of 300 g of pellet hops. The hanging handle lets it sit over a vessel so liquid drains through the cone.
What are the basket dimensions and material?
The basket is AISI 304 stainless steel, about 35 cm tall, with a top diameter of roughly 15 cm tapering to about 10 cm at the bottom. The conical shape concentrates solids at the tip and channels filtered liquid downward.
How should the filter be cleaned and cared for?
Rinse it promptly after use before residue dries into the fine mesh, and clean without abrasive pads or steel wool that can damage the 0.2 mm openings. Stainless steel tolerates hot water and food-safe cleaners; check the mesh for distortion so the filtration rating stays intact.
-
Specifications
Length (mm) 150.00 Width (mm) 150.00 Height (mm) 350.00 Weight (kg) 0.24 Gross Weight (kg) 1.00 Unit pcs Filtration accuracy (μm) 200 Material Stainless steel
Certifications CE
-
Do you want to preserve existing shopping cart?
Error