-
-
SKU: 1105
EAN: 2000000537180
Pump Liverani EP Mini 3/4" 1000L/h 3F/400V
Pump Liverani EP Mini
Installation Installation service: we install the device on site according to the manufacturer's instructions, connect to the line (mechanical connections) and perform initial setup and test run. Price depends on location, access and scope of work. (price by agreement / quote)No Yes779.00€
Price without VAT628.23€
0Europe/Tallinnout_of_stock_products0AvailabilityIn Stock Pärnu 1 pcs In Stock Out of Stock Supplier warehouse 0 pcs Out of Stock Shipping informationLoading…Warranty 24 monthsB2B invoice paymentSpare parts from e-shop -
-
Description
Pump Liverani EP Mini
Technical specifications
- Flow rate: 1000 L/h
- Voltage: 400V / three-phase
- Power: 0.37kW / 0.5HP
- Speed: 900 RPM
- Standard connection: DIN 11851 / Tri-Clamp
- Body material: AISI 316
- Shaft seal: Ceramic/Graphite/NBR
- Max temperature: 95°C
- Max pressure: 2.4 bar
- Working pH range: 5–9 (NBR)
- IP protection: IP55
- Suction depth: 6 m
- Max viscosity: 50 000 cP
- Cable: 4m
- Weight: 9.3 kg
- Certifications: CE, FDA
Features
- Fully reversible — operates in both directions
- Self-priming — dry start from up to 6 m depth
- Food contact approved — CE, FDA certified (EPDM impeller)
- Flow rate specified for water (1 cP). Actual output decreases with higher viscosity — up to 40% less at 1000 cP.
Applications
Wine, beer, juice and food industry liquid transfer.
Available on request
- Alternative impeller material: NR (natural rubber), CR (neoprene), NBR (nitrile), VMQ (silicone)
- SiC/SiC/Viton shaft seal for aggressive liquids (pH < 5 or > 9)
- Alternative connections: Garolla 40/60/80, Tri-Clamp, BSP
- Bypass valve with overflow protection (protects pump if outlet is closed)
- ON/OFF/REVERSE switch — direct cable control
- Speed variator (0–100% flow control)
- ATEX — explosion-proof version
-
Frequently asked questions about this product
How does the Liverani EP Mini prime itself, and what does the 6 m suction depth mean in practice?
The flexible food-grade (EPDM) impeller seals against the housing and creates a vacuum as it turns, so the pump draws the liquid up on its own without being filled first. In practice it can start dry and lift liquid from a tank or pit up to about 6 m below the pump. Avoid running it dry for long once primed, as the impeller relies on the liquid for lubrication and cooling.
Will I get the full 1000 L/h when pumping thick liquids such as syrup or lees?
The 1000 L/h figure is measured with water (1 cP). Thicker liquids move more slowly through the pump, so real output drops as viscosity rises — roughly up to 40% less around 1000 cP. When you plan to move dense juice, lees or syrup, choose a model with throughput to spare rather than one rated exactly at your target.
What is the reversible operation useful for in day-to-day work?
Because the pump runs equally well in both directions, you can empty the hoses and tank back to the source at the end of a transfer, or reverse briefly to clear a soft blockage — all without re-arranging the plumbing. It also lets you recirculate or return a batch without moving the unit.
How do I keep the impeller and shaft seal in good condition, and which liquids suit the standard seal?
Flush the pump with clean water after each use and don't leave the impeller compressed and dry in storage for long periods, as that shortens its life. The standard EPDM impeller with ceramic/graphite/NBR seal is intended for food liquids in the pH 5–9 range up to 95°C; for more aggressive media, Liverani offers alternative impeller materials such as nitrile, neoprene or silicone and a SiC/Viton seal.
-
Specifications
Length (mm) 340.00 Width (mm) 240.00 Height (mm) 160.00 Weight (kg) 9.00 Gross Weight (kg) 10.00 Volume (ml) 1000.00 Unit pcs Power (W) 370 Voltage 400V Max temperature +95 Throughput 1000 L/h Speed (RPM) 900 Volume (L) 1000 Pump work element Impeller
Material Stainless steel
Rubber (EPDM, NBR)
Intended use Wine
Beer
Juice
Weight (kg) 9.3
-
Do you want to preserve existing shopping cart?
Error