-
-
SKU: KL24433
EAN: 9388866624433
Siphon Pump Atex with 1/2" BSP thread including power supply
Siphon Pump with 1/2" BSP Thread, Including Power Supply Transfer beer, wine, cider, and alcoholic beverages (tested up to 10% ethanol) between containers without the hassle of priming the siphon. Place the receiving container side by side or even higher than the transfer container.
Installation Installation service: we install the device on site according to the manufacturer's instructions, connect to the line (mechanical connections) and perform initial setup and test run. Price depends on location, access and scope of work. (price by agreement / quote)No Yes63.90€
Price without VAT51.53€
0Europe/Tallinnout_of_stock_products0AvailabilityIn Stock Pärnu 2 pcs In Stock Out of Stock Supplier warehouse 0 pcs Out of Stock Shipping informationLoading…Warranty 24 monthsB2B invoice paymentSpare parts from e-shop -
-
Description
Siphon Pump with 1/2" BSP Thread, Including Power Supply
Transfer beer, wine, cider, and alcoholic beverages (tested up to 10% ethanol) between containers without the hassle of priming the siphon. Place the receiving container side by side or even higher than the transfer container. Perfect for transferring liquids between primary and secondary fermenters or from fermenter to bottling bucket or keg. Reduces excess oxygen exposure caused by manual pumping or blowing into the fermenter lid to prime the siphon.
Product Description
The Super Sucker 1/2" BSP self-priming siphon pump is the fastest and most convenient solution for moving beer, wine, cider, or strong alcoholic beverages between containers. Transfer liquids from primary to secondary fermenter or from fermenter to keg without excess oxygen exposure that occurs with manual siphon pumping or blowing into the fermenter lid.
Simply connect the transfer hose from the fermenter tap to the pump and then to the receiving container, press the switch, and let the Super Sucker pump do the work while you enjoy a cold drink.
With the Super Sucker pump, you don't need gravity or CO2 pressure to move liquid. Thanks to the pump's remarkable maximum lift height, you can leave the heavy, full fermenter on the ground and place the receiving keg or fermenter beside it or even higher, such as on a work surface.
Technical Specifications
- Self-priming
- 1/2" BSP inlet/outlet
- On/off switch
- Maximum flow rate: 4.23 l/min
- Suction capacity: 127 mm
- Maximum lift height: 3.8 m
- Maximum temperature: 60°C
- Pressure: 90 psi / 6.2 bar
- Voltage: 12V DC (3.5A)
- Power cord length: 1.2 m
- Power adapter cord length: 70 cm
- Power switch cord length: 25 cm
- Tested with 95% ethanol for 4h
Working Principle
The siphon pump uses an electric motor to create a vacuum that draws liquid from one container and pushes it into another. This allows pumping liquids without manual effort and ensures steady and controlled flow rate.
-
Frequently asked questions about this product
What does self priming mean and why is it better than a manual siphon?
Self priming means the pump draws the liquid itself, so you do not have to start the flow by sucking the tube or lifting the vessel. This avoids the mess and the oxygen pickup that come with starting a traditional gravity siphon by mouth.
Why does it help reduce oxidation of the finished drink?
Manual siphoning or blowing into the fermenter lid to start a siphon introduces air into the beverage. Moving the liquid through the closed pump path instead minimises contact with oxygen, which helps preserve the flavour and shelf life of beer, wine or cider.
Can the receiving container sit higher than the source?
Yes. Unlike a gravity siphon, the pump can move liquid even when the receiving vessel is level with or higher than the source container. This gives flexible placement when transferring between primary and secondary fermenters or from fermenter to keg.
Is it suitable for high strength spirits?
It is tested for beverages up to 10 percent ethanol, such as beer, wine and cider, so it suits normal fermentation transfers. For high proof spirits it is outside the tested range, so check compatibility before using it for stronger liquids.
-
Specifications
Length (mm) 180.00 Width (mm) 100.00 Height (mm) 100.00 Weight (kg) 0.94 Gross Weight (kg) 1.07 Unit pcs Voltage 12V Pressure (bar) 6.2 Temperature range 60°C – 60°C Connection size 1/2" BSP Alcohol contact max % 95 High-temp food contact °C 100 Certifications CE
NSF
ATEX
Food compliance Acid-resistant
Lead-free
Cadmium-free
Heavy metals compliant
Compliant EU 1935/2004
Compliant EU 10/2011
Compliant LFGB
Food contact certified
Phthalate-free
Volume (L) 4.23 Pump work element ATEX
-
Files
-
Do you want to preserve existing shopping cart?
Error