.png)
Hole punch 22mm for metal
EAN: 20000000541118
Brand:
Unit: pc
Stock qty: Pre-order
Delivery time (day): 7-14
Delivery time within Estonia for stock items approx. 3-5 working days. NOTE! Due to the rapid price increase, prices for non-stock items may change without prior notice! Standard prices with 24% VAT.
70,15 €/Kg
Hole punch 22mm for metal
Usage: This particular hole punch set is for the 22mm hole punch. Perfect for creating clean, burr-free holes in sheet metal for brewery equipment, kegerators, tap shanks, and fridge door installations.
Features: Produces significantly cleaner holes than carbide drill bits or hole saws. Can be used in mild sheet steel up to 3mm thick or stainless steel up to 1.5mm thick. No filing or cleaning required after punching.
Technical data: Hole size: 22mm (perfect for 5/8" holes for tap shanks and brewery gear). Compatible with sheet steel up to 3mm thick and stainless steel up to 1.5mm thick.
Usage Instructions:
- STEP 1: Use a drill with a stepped drill bit to drill a pilot hole
- STEP 2: Place bolt through hole
- STEP 3: Attach die and punch together from punch kit
- STEP 4: Use ring spanner to tighten bolt
- STEP 5: Keep tightening the bolt until you hear the click sound of the punch passing through the steel
- STEP 6: Remove the assembly from the hole and screw the die and punch set apart
- STEP 7: Throw away the slug
- STEP 8: Admire the perfectly clean hole - no further filing or cleaning required
Frequently asked questions about this product
What thickness of metal can this 22mm punch handle?
It is rated for mild sheet steel up to 3mm thick and stainless steel up to 1.5mm thick. Staying within these limits keeps the punch and die sharp and gives a clean cut; thicker or harder metal can damage the tool.
Why choose a hole punch over a drill bit or hole saw?
The punch shears the metal in a single action, leaving a clean, burr-free hole that needs no filing or cleanup. Carbide drill bits and hole saws tend to grab, wander and leave rough edges, which is a particular problem on thin stainless steel.
What fittings does the 22mm hole suit?
A 22mm hole is sized for 5/8 inch tap shanks and similar brewery hardware, so it suits kegerator builds, fridge-door tap installations and tap-shank mounting.
Do I need a pilot hole before punching?
Yes. The set works by drilling a small pilot hole, passing the draw bolt through it, then tightening so the die pulls through and shears the full 22mm hole. The pilot hole centres the punch for an accurate, round result.
| Weight (kg) | 0.134000 |
| High (m) | 0.4 |
| Width (m) | 0.4 |
| Length (m) | 0.6 |
2,90 €
