.png)
Pump Liverani EP MAXI 80 clamp connection 36000L/h +95C 3F/400V
EAN: 20000000543174
Brand:
Unit: pc
Stock qty: Pre-order
Delivery time (day): 5-10
Delivery time within Estonia for stock items approx. 3-5 working days. NOTE! Due to the rapid price increase, prices for non-stock items may change without prior notice! Standard prices with 24% VAT.
Pump Liverani EP MAXI 80
Technical specifications
- Flow rate: 36000 L/h
- Voltage: 400V / three-phase
- Power: 3.3kW / 4.5HP
- Speed: 470 RPM
- Standard connection: Garolla 80 (DN80) / Tri-Clamp
- Body material: AISI 304
- Shaft seal: SiC/SiC/NBR
- Max temperature: 95°C
- Max pressure: 1.6 bar
- Working pH range: 5–9 (NBR)
- IP protection: IP55
- Suction depth: 6 m
- Max viscosity: 50 000 cP
- Cable: 4m
- Weight: 68 kg
- Certifications: CE, FDA
Features
- Fully reversible — operates in both directions
- Self-priming — dry start from up to 6 m depth
- Food contact approved — CE, FDA certified (EPDM impeller)
- Terminal block connection — easy integration with control systems
- Flow rate specified for water (1 cP). Actual output decreases with higher viscosity — up to 40% less at 1000 cP.
Applications
High-throughput pumping in large production facilities.
Available on request
- AISI 316 stainless steel body
- Alternative impeller material: NR (natural rubber), CR (neoprene), NBR (nitrile), VMQ (silicone)
- Ceramic/Graphite/NBR or Ceramic/Graphite/Viton shaft seal
- Alternative connections: DIN 11851, Tri-Clamp, BSP
- Bypass valve with overflow protection (protects pump if outlet is closed)
- ON/OFF/REVERSE switch — direct cable control
- Speed variator (0–100% flow control)
- ATEX — explosion-proof version
Frequently asked questions about this product
Will the pump deliver its rated flow with thick or pulpy liquids?
The rated flow is measured with water (1 cP). With more viscous products the real output is lower — up to about 40% less at 1000 cP — so size the pump with your actual product viscosity in mind, not just the headline figure.
Can the pump start dry and lift liquid from below its own level?
Yes. It is self-priming and can start dry, drawing liquid from a suction depth of up to 6 m, which is useful for emptying tanks or pits located below the pump.
Why does it matter that the pump is fully reversible?
Running in both directions lets you push product forward or pull a line back to recover or empty it, adding flexibility during transfer, filling and cleaning operations.
Is the pump suitable for hot liquids and food contact?
It is rated for products up to 95 °C and is CE/FDA food-contact approved with an EPDM impeller, with an NBR seal working in the pH 5-9 range, making it appropriate for tasks such as pasteurisation and food-industry transfer.
| Weight (kg) | 68.0 |
| High (m) | 0.6 |
| Width (m) | 0.8 |
| Length (m) | 1.2 |
589,00 €
