.png)
Pump Liverani EP MAJOR 60 ON/OFF/REVERSE switch cable 22500L/h +95C 3F/400V
EAN: 20000000537388
Brand:
Unit: pc
Stock qty: Pre-order
Delivery time within Estonia for stock items approx. 3-5 working days. NOTE! Due to the rapid price increase, prices for non-stock items may change without prior notice! Standard prices with 24% VAT.
Pump Liverani EP MAJOR 60
Technical specifications
- Flow rate: 22500 L/h
- Voltage: 400V / three-phase
- Power: 1.87kW / 2.5HP
- Speed: 900 RPM
- Standard connection: Garolla 60 (DN65)
- Body material: AISI 304
- Shaft seal: Ceramic/Graphite/NBR
- Max temperature: 95°C
- Max pressure: 2.8 bar
- Working pH range: 5–9 (NBR)
- IP protection: IP55
- Suction depth: 6 m
- Max viscosity: 50 000 cP
- Cable: 4m
- Weight: 31 kg
- Certifications: CE, FDA
Features
- Fully reversible — operates in both directions
- Self-priming — dry start from up to 6 m depth
- Food contact approved — CE, FDA certified (EPDM impeller)
- ON/OFF/REVERSE switch (4m cable included) — direct control without additional equipment
- Flow rate specified for water (1 cP). Actual output decreases with higher viscosity — up to 40% less at 1000 cP.
Applications
High-volume pumping in breweries, juice production and food industry.
Available on request
- AISI 316 stainless steel body
- Alternative impeller material: NR (natural rubber), CR (neoprene), NBR (nitrile), VMQ (silicone)
- SiC/SiC/Viton shaft seal for aggressive liquids (pH < 5 or > 9)
- Alternative connections: DIN 11851, Tri-Clamp, BSP
- Bypass valve with overflow protection (protects pump if outlet is closed)
- Speed variator (0–100% flow control)
- ATEX — explosion-proof version
Frequently asked questions about this product
How does the Liverani EP MAJOR 60 prime itself, and what does the 6 m suction depth mean in practice?
The flexible food-grade (EPDM) impeller seals against the housing and creates a vacuum as it turns, so the pump draws the liquid up on its own without being filled first. In practice it can start dry and lift liquid from a tank or pit up to about 6 m below the pump. Avoid running it dry for long once primed, as the impeller relies on the liquid for lubrication and cooling.
Will I get the full 22500 L/h when pumping thick liquids such as syrup or lees?
The 22500 L/h figure is measured with water (1 cP). Thicker liquids move more slowly through the pump, so real output drops as viscosity rises — roughly up to 40% less around 1000 cP. When you plan to move dense juice, lees or syrup, choose a model with throughput to spare rather than one rated exactly at your target.
What is the reversible operation useful for in day-to-day work?
Because the pump runs equally well in both directions, you can empty the hoses and tank back to the source at the end of a transfer, or reverse briefly to clear a soft blockage — all without re-arranging the plumbing. It also lets you recirculate or return a batch without moving the unit.
How do I keep the impeller and shaft seal in good condition, and which liquids suit the standard seal?
Flush the pump with clean water after each use and don't leave the impeller compressed and dry in storage for long periods, as that shortens its life. The standard EPDM impeller with ceramic/graphite/NBR seal is intended for food liquids in the pH 5–9 range up to 95°C; for more aggressive media, Liverani offers alternative impeller materials such as nitrile, neoprene or silicone and a SiC/Viton seal.
| Weight (kg) | 31.000000 |
| High (m) | 0.6 |
| Width (m) | 0.8 |
| Length (m) | 1.2 |
