.png)
Seal kit for NukaTap bottle filler
EAN: 20000000541217
Brand:
Unit: pc
Stock qty: Pre-order
Delivery time (day): 7-14
Delivery time within Estonia for stock items approx. 3-5 working days. NOTE! Due to the rapid price increase, prices for non-stock items may change without prior notice! Standard prices with 24% VAT.
6400,01 €/Kg
Seal kit for NukaTap bottle filler
⚠️ Important: Different plant extracts, tinctures or liquids may damage plastic during prolonged contact. Checking compatibility of packaging with the solution is the responsibility of the filler/manufacturer.
Frequently asked questions about KL27632
Which bottle filler does this set fit?
The set is specially designed for the NukaTap back pressure bottle filler. It includes all seals for this unit, including vent valve seal, 1/4" male thread seal, pressure fitting seals, and gas release valve seals. It is not intended for use with other bottle fillers.
How often should I replace the seals?
There is no fixed interval — replace the seal as soon as you notice a leak, a drop in pressure during bottling, or visible wear such as cracks or deformation. As a general rule, check seals every few bottling sessions and keep a spare set handy to avoid downtime.
Can these seals be used with any fluid?
Seals are suitable for beer, cider, carbonated drinks and similar products. However, plant extracts, essential oils, tinctures or solvent-based liquids can damage plastic and rubber with prolonged exposure. Always check the chemical compatibility of your product before use.
How to install new gaskets?
Release the pressure from the bottle filler and disassemble the corresponding part. Carefully remove the old gasket without scratching the sealing surface, clean the groove and install the new gasket by hand. Avoid sharp tools that can damage the rubber. Assemble and check pressure before bottling.
How to clean and maintain seals?
Clean the seals with warm water and a brewer-safe detergent, then rinse thoroughly. Avoid aggressive solvents. Store spare seals in a sealed bag away from direct sunlight, heat and ozone sources. Proper storage extends the shelf life and keeps the rubber flexible.
| Weight (kg) | 0.001000 |
| High (m) | 0.04 |
| Width (m) | 0.09 |
| Length (m) | 0.12 |
